How to Install a Water Flow Sensor in an Espresso Machine

1. Identify the Optimal Installation Point

How to Install a Water Flow Sensor in an Espresso Machine？For the most accurate readings, placement is everything. You should install the sensor between the water reservoir and the high-pressure pump.

• Why this spot? Placing the sensor here allows for precise measurement of cold water before it enters the heating element or encounters the backpressure of the pump.
• Pro Tip: Ensure the sensor is easily accessible for future maintenance or cleaning.

2. Secure Food-Grade Connections

Since this application involves drinking water, using food-grade tubing is non-negotiable.

1. Align the tubing with the sensor’s inlet and outlet nozzles.
2. Check the Flow Direction: Locate the arrow molded onto the sensor body. Installing the sensor backward is a common mistake that leads to zero signal or inaccurate data.
3. Use secure clamps to prevent leaks, especially if the system experiences vibration during the brewing cycle.

3. Wiring and Signal Integration

• Red Wire: Power Supply (typically 3V–24V DC).
• Black Wire: Ground.
• Yellow/Blue Wire: Pulse Signal Output.

4. Calibration for Consistency

The final step is the most important: Calibration. Run several test cycles without coffee to measure the actual water output versus the sensor’s pulse count.

• Step A: Dispense 100ml of water into a measuring cup.
• Step B: Compare the physical volume to the digital reading.
• Step C: Adjust the software parameters until the deviation is less than 1-2%.

---

Why Choose Our Capacitive Sensors?

Our sensors provide the robust performance you need for your most demanding applications. They deliver reliable detection of materials other sensors cannot see, helping you automate processes efficiently and reduce downtime.

We would be happy to discuss how our products can provide a solution for your specific needs.

Bize ulaşın ücretsiz numune ve teknik destek için bugün!